Solutions for humidity by condensation

Soluciones para la humedad por condensación

Solutions for humidity by condensation

Humidity by condensation occurs in homes when water vapor in the air changes to a liquid state when it touches a cold surface. This can be seen as drops of water on the glass or as mold stains on the ceilings and walls.

This type of problem is usually common in areas where there is little ventilation and causes many inconveniences. If you have this problem in your home and you want to eliminate it, you have come to the right place. At Humilogic we have prepared this information with the solutions for humidity by condensation. Let’s see what they are.

Causes of humidity by condensation

To know how to solve something, you must first know why it occurs, in order to give it an adequate treatment. In the case of condensation, this usually happens because there is not adequate ventilation in the home.

This fact means that activities such as drying clothes inside the house, cooking or placing the heating very high, cause the air to retain the moisture that is released and, as a result, when it meets a cold surface it condenses and transforms in a drop of water.

The best solution to remove humidity by condensation

Now that the cause of this problem is known, the correct solution can be found. In this case, since the problem is the lack of ventilation, the humidity due to condensation will disappear if a VMI is installed.

The VMI or Mechanical Ventilation by Insufflation is a system that allows the air inside the house to be constantly ventilated without having to constantly open the windows.

How does a vmi work?

This is a smart system that works only when needed. The VMI constantly evaluates the relative and absolute humidity and the temperature outside and inside the home, deciding the most appropriate time to ventilate.

In winter, the equipment preheats the air before sending it into the home. Likewise, it will also filter the air so that pollen or annoying particles from the outside do not enter.

In addition, it has a very low consumption and does not produce noise. In the latter case, the sound just one meter away is not perceived.

Steps for the treatment of humidity by condensation

The installation of this system is done basically in two steps, these are:

1.VMI Installation

2.Placement of the different air outlets.

However, it should be noted that each Humilogic installation is carried out in a personalized way. For this, the plans of the house are sent to the Ventilairsec Engineering Department so that they can carry out the necessary study to offer the best solution for your particular case.

On the other hand, the days that the installation lasts may vary. For example, in a house with a 30 m2 buried wall with a leak, the treatment for condensation dampness takes about 4 days.

Solve humidity due to condensation with Humilogic

If your home is experiencing moisture problems due to condensation. Do not hesitate to contact Humilogic. We offer a definitive solution for your humidity problem.

We have special equipment to diagnose your moisture problem, and we offer the best service.

In addition, we make personalized budgets and make totally free home visits. Do not stop contacting us to provide you with solutions for humidity by condensation.

× Infórmate por Whatsapp.